Flat Preloader Icon

Gutter guards are an essential addition to any home, as they help prevent clogs and keep water flowing freely through your gutters. If you’re tired of constantly cleaning out your gutters or live in an area with frequent weather events, installing gutter guards can be a game-changer. In this comprehensive guide, we will walk you through the process of installing gutter guards, providing step-by-step instructions and valuable tips to ensure a successful installation.

Types of Gutter Guards

There are several types of gutter guards available on the market, each with its own unique design and installation method. Some popular options include:

  • Foam Gutter Guards: These guards are made of porous foam material that allows water to pass through while blocking debris. They are easy to install and can be trimmed to fit your gutters.
  • Brush Gutter Guards: Brush guards resemble giant pipe cleaners and are placed inside the gutters. They prevent leaves and larger debris from entering while allowing water to flow freely.
  • Screen Gutter Guards: These guards consist of metal or plastic screens that cover the top of the gutters. They are secured in place using clips or fasteners and provide effective protection against leaves and debris.
  • Micro-Mesh Gutter Guards: Micro-mesh guards feature a fine mesh screen that blocks even the smallest particles from entering your gutters. They are highly durable and provide excellent water flow while keeping out debris.
  • Reverse-Curve Gutter Guards: These guards use surface tension to direct water into the gutters while deflecting debris. They are typically installed by professionals and require precise alignment to ensure optimal performance.

Preparing for Installation

Before you begin the installation process, it’s important to prepare your gutters and gather all the necessary tools and materials. Here are the steps to follow:

Clean Your Gutters

Start by thoroughly cleaning your gutters to remove any existing debris. Use a ladder, gloves, and a hose with a spray nozzle to clear out leaves, twigs, and other obstructions. This step is crucial to ensure optimal performance of your gutter guards.

Inspect Your Gutters

While cleaning your gutters, take the time to inspect them for any damage or areas that may need repair. Replace any cracked or broken sections to ensure the integrity of your gutter system.

Measure Your Gutters

Measure the length and width of your gutters to determine the amount of gutter guards you’ll need. This will help you select the appropriate size and ensure a proper fit.

Research and Select Gutter Guards

Do some research to find the best gutter guards for your specific needs. Consider factors such as durability, ease of installation, and compatibility with your gutter system. Read product reviews, compare prices, and choose a gutter guard that fits your budget.

Gather Tools and Materials

To install gutter guards, you’ll need the following tools and materials:

  • Ladder
  • Gloves
  • Tape measure
  • Screwdriver
  • Tin snips (for cutting guards if necessary)
  • Self-tapping screws (if required by your chosen guards)
  • Roofing cement or caulk (for sealing any gaps or joints)

By gathering all the necessary tools and materials in advance, you’ll be well-prepared for a smooth installation process.

Step-by-Step Installation Guide

Now that you’re ready to install your gutter guards, follow these step-by-step instructions for a successful installation:

  • Begin at the end of the gutter run opposite the downspout. Insert a putty knife between the shingles and the underlayment, being careful not to lift the underlayment from the roof’s wooden structure.
  • Loosen about halfway up the first row of shingles, just enough to accommodate the edge of the guard. Take care not to damage the shingles during this process.
  • Align the guard section with the roofline and insert it under the lifted shingles. Continue lifting shingles and sliding in the gutter guard until you reach the end of the first section.
  • Depending on the type of guard, secure it in place using clips, fasteners, or self-tapping screws. Follow the manufacturer’s instructions for your specific product.
  • Repeat the installation process for the remaining gutter guard sections, ensuring they overlap by the recommended amount as specified in the installation guide
  • For corners, butt-join mesh or grate guards, or cut mitre joints for surface-tension guards. Use a mitre box or protractor to measure and cut the appropriate angles.
  • Apply roofing cement or caulk over screw holes to ensure a watertight seal.
  • Double-check the alignment and stability of your gutter guards before completing the installation.

Maintenance and Cleaning

While gutter guards significantly reduce the frequency of gutter cleaning, they still require occasional maintenance to ensure optimal performance. Here are some maintenance tips:

  • Regularly inspect your gutter guards for any signs of damage or debris buildup.
  • Remove any leaves, twigs, or other debris that may accumulate on the surface of the guards.
  • Flush your gutters with water periodically to check for proper water flow and remove any trapped debris.
  • If you notice any issues with your gutter system, such as leaks or improper drainage, address them promptly to prevent further damage.

By maintaining your gutter guards and addressing any issues promptly, you can extend their lifespan and maximise their effectiveness.

DIY vs. Professional Installation

Deciding whether to install gutter guards yourself or hire a professional depends on your comfort level with DIY projects and the complexity of your gutter system. Here are some factors to consider:

  • DIY Installation: Installing gutter guards yourself can save you money and give you a sense of accomplishment. However, it requires time, effort, and attention to detail. Make sure you have the necessary tools and skills before attempting a DIY installation.
  • Professional Installation: If you’re not comfortable working at heights or don’t have the time or expertise for a DIY installation, hiring a professional is a wise choice. Professional installers have the knowledge and experience to ensure proper installation and can recommend the best gutter guard system for your specific needs.

Consider your budget, time constraints, and skill level before deciding whether to go the DIY route or hire a professional for your gutter guard installation.


Installing gutter guards is a smart investment that can save you time and money in the long run. By preventing clogs and maintaining proper water flow, gutter guards protect your home from water damage and reduce the need for frequent gutter cleaning. Whether you choose to install them yourself or hire a professional, following the steps outlined in this guide will help you successfully install and maintain gutter guards for years to come.